Jiangyin Chengxin Alloy Material Co., Ltd ，
Jiangsu Xiangcheng Supply Chain Management Co. LTD
Add to Cart
Insulated Heating Wire Made from CuNi10 NC015 Alloy Material for Long-lasting and Performance in Industrial Applications
The CuNi NC015 Alloy Material Insulated FEP Heating Wire is a specialized heating wire made from a Copper-Nickel (CuNi) NC015 alloy, known for its high electrical resistance, corrosion resistance, and excellent thermal stability. The wire is insulated with Fluorinated Ethylene Propylene (FEP), which provides high-temperature resistance, chemical resistance, and electrical insulation.
Bulletproof Silk (Optional)
| Material | Temperature resistance | Thermal decomposition | Applied for grade | Advantages |
| High strength aramid | In a 100 to 250 ℃ long-term use will not have obvious change and impairment | Thermal decomposition temperature more than 450 degrees | Applied for more than 110N | 1. Good mechanical 2. Heat resistant and flame retardant 3. The stable chemical properties 4. Radiation resistanc 5. Durability |
Alloy Material
| Texture | Ni-Cu (Can be enameled) |
| Resistance | According to the requests |
| Wire diameter | 0.05~0.12mm |
| Characteristic | 1. High strength 2. Strong hardness 3. Anti-corrosion 4.Thermoelectricity good |
| Operating principle | Heating filament dogan twisted |
Paint Cladding(Optional)
| Texture | Polyurethane | Polyetherimide |
| Temperature class | -50~150℃ | -160~180℃ |
| Characteristic | 1. Performance wide adjustable range well-adapted 2. Adhesive performance is good 3. Good elasticity, good resilien, can be used for dynamic joint 4. Good flexibility at low temperatures 5. Good weather resistance,service life up to 15~20 years 6. Good oil resistance 7. Biological aging resistance 8. Moderate cost | 1. Excellent Mechanical Properties 2. Good electrical insulatingperformance 3. Excellent radiation resistance 4. Excellent resistanceto high and low temperature performance 5. Excellent wear resistance 6. Excellent microwave through performance 7. Strong plastcity |
Outer Sheath (Optional)
| Texture | PA12 | TPEE | PVC | FEP |
| Plastic outer diameter | 0.8mm~1.0mm | |||
| Temperature class | -40~140C | -70~200℃ | -30~125℃ | -100~220℃ |
| Dielectric strength | 39Kv/mm | 36Kv/mm | 36Kv/mm | 42Ky/mm |
| Dielectric constant | 1.9×10^7 HZ | 1.4×10^7 HZ | 1.4×10^7 HZ | 2.8×10 HZ |
| Breaking strength | 19~25MPa | 18~24MPa | 18~24MPa | 15~22MPa |